Are you still worried about the broken conveyor belt?

Note the following Reasons for conveyor belt breakage:

1. The tension of the conveyor belt is not enough.

2. The conveyor belt is overloaded or used over time.

3. The material is stuck or punched.

4. The quality of the conveyor belt joint does not meet the requirements; the joint is seriously deformed or damaged.

5. The conveyor belt is stuck.

6. The tension of the conveyor belt is too large.

How to prevent conveyor belt breakage?

1. Replace the conveyor belt in time, and pay attention to whether the new belt meets the requirements.

2. Strictly check whether there is any material residue on the conveyor belt.

3. Regularly check the joint of the conveyor belt and replace the damaged joint in time.

4. The tensioning adjustment of the tensioning device is appropriate, and it should not be too large or too small.

5. Add deviation adjustment drag rollers and anti-deviation protection devices; if the conveyor belt is found to be stuck by the frame, it should be stopped immediately.