How to clean the conveyor belt thoroughly？

The method of cleaning the conveyor belt depends on its material and degree of contamination. The following are several common cleaning methods:
Use alcohol or Baijiu. Dip a cotton swab with a little alcohol or Baijiu, gently wipe the oily surface of the conveyor belt, and then wipe it dry with a clean soft cloth.
Use dry cleaning agent. If you have a dry cleaning agent at home, you can simply clean the conveyor belt according to the instructions. Dry cleaning agents have a good cleaning effect on non stubborn stains such as edible oil.
Use toothpaste. After wiping the oil stains with a dry cloth, gently wipe the oil stains with a bit of toothpaste dipped in a cloth to clean them.
Use cleaning solution. Firstly, soak the conveyor belt in a solution mixed with cleaning solution and water (in a ratio of approximately 1:10), and then use a low-pressure spray gun to evenly spray. Be careful not to use a high-pressure spray gun to avoid damaging the surface of the belt. When rinsing the spray gun, be careful not to rinse the same position repeatedly, and finally wipe it clean with clean water.
Use soapy water. Wash the surface of the conveyor belt with clean water and a small amount of soapy water, do not use a hard bristled brush to clean.
Use specialized cleaning solution. If there is residue or adhesive on the surface of the conveyor belt, some professional cleaning solution can be used.
In addition, before cleaning, the power supply of the equipment should be turned off to ensure safety. Remove the conveyor belt, wipe off large pieces of dirt and impurities on the surface with a dry cloth, soak the conveyor belt in cleaning solution, clean the surface and edges of the conveyor belt one by one with a cleaning brush, rinse the conveyor belt with clean water, and wipe the conveyor belt dry with a dry cloth to ensure a clean surface