一、 Reasons for package damage caused by conveyor belt jamming
The conveyor belt may experience package damage during long-term use, mainly due to the following reasons:
- Impurities such as metal blocks, stones, etc. are mixed in the transported materials, which can easily jam the packages on the conveyor belt;
- Excessive friction of the conveyor belt can easily cause package jamming damage;
- The conveyor belt is not repaired in a timely manner, resulting in excessive wear and even dropping of packages on the conveyor belt.
二、 Handling methods for damaged packages on conveyor belts
When the packages on the conveyor belt are damaged, we need to take timely measures to deal with them, so as not to affect the conveying efficiency and production safety. Here are some commonly used processing methods:
- Wire rope method: Put a certain length of wire rope around the outside of the stuck package, and then use a forklift to gently lift it upwards to gradually detach the package from the conveyor belt;
- Pushing method: Use hard objects such as iron bars to push and squeeze the stuck package, gradually separating it from the conveyor belt;
- Crowbar method: Use pry bars, iron bars, and other objects to gently pry open between the stuck package and the conveyor belt, gradually detaching from the conveyor belt.
三、 How to avoid the occurrence of package damage caused by conveyor belt jamming
Maintaining the conveyor belt well is the key to avoiding package damage caused by belt jamming. Here are some common maintenance methods:
- Regularly maintain the conveyor belt and replace excessively worn parts in a timely manner;
- Regularly clean the debris on the conveyor belt to avoid damage to the package caused by debris;
- Regularly check the size and properties of the materials carried by the conveyor belt to avoid the impact of too large or heavy materials on the conveyor belt.
By using the above methods, it is possible to effectively avoid the occurrence of package damage on the conveyor belt and ensure the normal operation of the conveyor belt.
【 Conclusion 】 It is difficult to avoid the situation of damaged packages on the conveyor belt in production, but we can take measures to deal with and prevent it. I believe that through the introduction in this article, everyone can better understand the damaged packages on the conveyor belt and their handling methods.
